All gasoline engines have spark plugs, one for each cylinder. Individual high-speed gasoline engines also have two spark plugs per cylinder. Although the spark plug is a small part, it is extremely important. Without it, the engine will not move. Anyone who often drives will be familiar with this device.
The function of the spark plug is to introduce the high voltage (more than 10000 volts) generated by the ignition coil into the engine cylinder, and generate a spark between the spark plug electrodes to ignite the mixture. The working environment of the spark plug is extremely bad. Take the spark plug of an ordinary four-stroke gasoline engine for example, the temperature is only 60 ℃ and the pressure is 90 KPa during the intake stroke; During ignition and combustion, the temperature will instantly rise to 3000 ℃ and the pressure will reach 4000KPa; The alternating frequency of quenching and heating is very high, which is not what ordinary materials can cope with, but also to ensure the insulation performance. Therefore, the material requirements for spark plugs are also very strict.
The spark plug is small, but its structure is not simple. It has two major components: an insulator and a metal shell: the metal shell has threads for screwing into the cylinder; An insulator is installed in the shell, which is connected with a central electrode, and the upper end of the central electrode is provided with a wiring nut to connect the high-voltage wire from the distribution panel; The lower end of the shell is welded with a grounding electrode. There is a gap of 0.6-1.0 mm between the central electrode and the grounding electrode. When the high-voltage electricity enters the ground through this gap, it will emit sparks to ignite the mixture.
The key part of the spark plug is the insulator. If the insulator does not work, the high-voltage electricity will "take a path" and enter the ground without passing through the two poles, causing no spark. The insulator of spark plug must have good mechanical properties and the ability to withstand high voltage, high temperature impact and chemical corrosion. Ordinary spark plugs are mostly made of alumina-based ceramics. The size of spark plugs is uniform throughout the world, and can be used in any vehicle. However, due to the different types of gasoline engines, there are two basic types of spark plugs: cold type and hot type. The cold type is relative to the hot type, which reflects the thermal characteristics of the spark plug. The spark plug can work well only if it has proper temperature, and can work normally only if there is no carbon deposit. Practice has proved that when the spark plug insulator is kept at the temperature of 500-600 ℃, the oil drops falling on the insulator can be burned immediately without forming carbon deposits. Above this temperature, it will ignite early, and below this temperature, there will be carbon deposits. The temperature on different engines will be different, so the designer uses the length of the insulator skirt to solve this problem. Some skirts are short, with small heating area and fast heat dissipation. Therefore, the skirt temperature is lower, which is called cold spark plug. It is suitable for high-power engines with high speed and high compression ratio; Some skirts are long and thin, with large heating area and slow heat dissipation. Therefore, the skirt temperature is higher, which is called thermal spark plug. It is suitable for small power engines with medium and low speed and low compression ratio. The spark plugs used in your car should be selected according to the manufacturer's specifications. Not all spark plugs are applicable.
The spark plug looks simple, but it is not easy to make. It has very high requirements for materials and manufacturing technology. Because the working environment is very bad, the spark plug insulator is often broken and the electrode carbon failure often occurs, so it is a "vulnerable part". Many drivers have spark plugs in their tool boxes for replacement at any time. Of course, with the development of technology, the durability of spark plugs has also improved. Platinum alloy is used as electrode material to replace the traditional copper-nickel alloy, which extends the service life of spark plugs. The service mileage of spark plugs for modern cars is about 50000 kilometers.
There are many factors to consider when selecting spark plugs, such as engine model, cooling mode, number of strokes, fuel grade, ambient temperature and common working conditions. Generally, the model of spark plug has been determined when the motorcycle and automobile leave the factory. If the installation size is consistent, the user can choose the spark plug according to the ambient temperature, road conditions, and the calorific value of the old and new machine. For example, under the standard conditions of domestic spark plugs, the calorific value model is generally 6. When the temperature is lower than 5 ℃, the spark plug with a lower calorific value should be selected to ensure the working temperature of the spark plug skirt. For the old engine, the spark plug with a lower calorific value can be selected to resist the pollution of the spark plug due to the wear and tear of the parts and the oil channeling.
Many times, it is difficult to start the engine cold or hot. Sometimes, it needs to be started many times before the engine can start. After landing, the idle speed is unstable, jitter, poor acceleration, insufficient power, and the idle speed automatically stalls frequently, and the oil and gas consumption increases. This is caused by damage to the spark plug.
First of all, check the fault. After cleaning the throttle valve, replacing the spark plug and high voltage wire, the fault phenomenon did not improve. The fault phenomenon was more obvious when the air conditioner was turned on. Connect the oil pressure gauge for test. When the idle speed shakes and stops, the oil pressure remains at 260 kPa, indicating that the oil supply is normal; Check the ignition and working status of each cylinder by using the cylinder cutout method, remove the high voltage wire of the first cylinder, and use a good spark plug to perform the ignition test. The engine does not stop although it shakes; However, when the high-pressure lines of cylinders 2, 3 and 4 are removed for the fire test, the engine is difficult to start and will automatically stop even if it is occasionally started. It is determined that the spark plug of cylinder 1 is not working properly.
Secondly, carry out troubleshooting. After replacing the new spark plug of cylinder 1, the fault is completely eliminated.
Finally, through fault analysis and verification of the ignition system data of the vehicle model, it is known that the vehicle adopts a modular, distributor-free, double-spark static high-voltage distribution ignition system. There are two ignition coils in the static high-voltage distribution body, and each ignition coil secondary has two output terminals, which are connected to the spark plugs of each cylinder through the high-voltage wire to form a double ignition circuit. When the ignition coil is ignited normally, if the gap between the two spark plugs is normal, the working cylinder is at the top dead center of compression, and the combustible mixture gas pressure is compressed, the impedance formed between the spark plug electrodes is small, which is easy to be broken down and ignited, and the ignition power will be concentrated on the spark plug of the working cylinder for ignited; Because the other cylinder is at the top dead center of exhaust, the impedance formed by the gas in the cylinder is relatively large, which is not easy to be broken down and ignited, thus ensuring the normal ignition of the power cylinder. When a spark plug has a short circuit, the breakdown voltage of the spark plug is reduced, and most of the electric energy is lost through the faulty spark plug, resulting in the failure of the ignition of the other cylinder, resulting in the poor operation of both cylinders, and the engine is not easy to start; When a spark plug has an open circuit, because the breakdown voltage of the spark plug is too high, the ignition energy will jump through the normal spark plug, so the other opposite cylinder can still ignite normally, and three cylinders of the engine can work normally, so the stability and power are very poor.
Feb 10, 2023
Leave a message
What Are The Functions Of Automobile Spark Plugs?
Send Inquiry




